Carbon Fiber HTPLA Filament - 1.75mm / 1kg
Every spool of MakerGeeks HTPLA (High Temperature PLA) is 100% made in the USA; from the spool to the colorant to the raw plastic resin you can be sure we not only source it from US based companies but also extrude, spool and package it all in-house at our US based plant.
MakerGeeks HTPLA (High Temperature PLA) is stronger than ABS, PETG, Co-Polyester Blends and even most Nylons - our HTPLA stands up to the sanitizing heat of a dishwasher with no deformation - and yet, still prints just like a normal PLA 3D Filament no special equipment or nozzle temperatures needed.
Nano-Carbon Fiber HTPLA 3D Filament is an industry first to use nano particles to blend with a trademarked PLA resin to create a carbon fiber 3D printer filament. Nano-Carbon Fiber HTPLA from MakerGeeks really shows off in that you are not required to have a special 3D printer or expensive stainless steel nozzles to use Nano-Carbon Fiber HTPLA.
We have been doing a lot of Beta-Testing here and finding that if you can build your 3D print to print the part you need using LONG straight layers you’ll find that you have a really strong part and it’s nearly identical to Carbon Fiber!
Just load it up as you would any other Maker Geeks HTPLA 3D Printer Filament from MakerGeeks.com and go to town. When you are finished you'll have a very strong carbon fiber blended resin!
Plus, since you are ordering direct from the MakerGeeks factory you are able to save big. Our HTPLA is made from trademarked NatureWorks Ingeo® brand HTPLA and is 100% pure with NO harmful additives.
What Makes MakerGeeks HTPLA Different:
- FDA Compliant for Food Contact
- New High Temperature PLA Resin - no deformation up to 125c (250f)
- Easy Annealable Process to increase Heat Deflection Temperature (HDT)
- Tensile Strength @ over 6,000psi
- IZOD Impact Strength (notched) @ 40 Newtons!!
Here at MakerGeeks we even make our own empty spools using 100% recycled ABS plastic - so you can be sure that you are doing your part to not only be cost effective but also environmentally responsible.
MakerGeeks HTPLA Specifications:
- Extrusion Temperatures: 235c +/- 10c
- Bed Temperature: Not needed, but if your 3D printer has heated bed 40c-60c works great
- Spool Diameter: 7.94" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.25"
- 1 kg spool
- Dimensional Accuracy: ±0.03mm
- PLA Density: 1.23 g/cm³
- Volume: 0.815 L
- Length: 335 m (+/- 5%)
MakerGeeks Promise to you is that you’ll absolutely love each spool that you buy from us or we’ll refund your money no questions asked - we offer a lifetime return policy on each spool we make! It’s that simple…